JOURNAL PUBLICATIONS:

 

 1976-1980

 

1.     "Microstress Distributions in Single Silicon Crystals", H. Ghonem and J. W. Provan, Canadian Metallurgical Quarterly, Vol. 16, No. 3, pp 319-326, 1976.

 

1981-1985

 

2.     "Comparative Performance of Type II Designs",  H. Ghonem, R. Gonsalves, and G. Bartley, ASME Transactions, 80-RT-8, pp. 1-16, March 1980.

3.     "Micromechanics Theory of Fatigue Crack Initiation and Propagation", H. Ghonem and J. W. Provan, Engrg Fracture Mechanics, Vol. 13. No. 4, pp. 963-977, 1981.

4.     "Effects of Streaks on Fracture Toughness of Steel", D. Parsons, J. Kalousek and H. Ghonem.  Canadian Metallurgical Quarterly, Vol. 21, No. 1, pp. 25-30, 1982.

5.     "Quantitative Model to Estimate Rail Surface Failure", H. Ghonem and J. Kalousek.  Wear, Vol. 97, pp. 65-81, 1984.

6.     "Probabilistic Description of Fatigue Crack Growth in Polycrystalline Solids", H. Ghonem and S. Dore, Engrg Fracture Mechanics, Vol. 21, No. 6, pp. 1151-1168, 1985.

 

1986-1990

 

7.     "Experimental Study of the Constant Probability Crack Growth Curves Under Constant Amplitude Loading", H. Ghonem and S. Dore, Engrg Fracture Mechanics, Vol. 27, No. 1, pp. 1-25, 1987.

8.     "Study of Surface Crack Initiation Due to Biaxial Compression/Shear Loading", H. Ghonem and J. Kalousek.  Engrg Fracture Mechanics, Vol. 30, No. 5, pp.667-683, 1988.

9.     "Constant-Probability Crack Growth Curves", H. Ghonem, Engrg Fracture Mechanics, Vol. 30, No. 5, pp. 685-699, 1988.

 

1991-1995

 

10.   "Oxidation-Assisted Fatigue Crack Growth Behavior in Alloy 718 - Part I:  Quantitative Modeling", H. Ghonem and D. Zheng, Fatigue and Fracture of Engrg Materials & Structures, Vol. 14, No. 7, pp. 749-760, 1991.

11.   "Oxidation-Assisted Fatigue Crack Growth Behavior in Alloy 718 - Part II:  Application", D. Zheng and H. Ghonem, Fatigue and Fracture of Engrg Materials & Structures, Vol. 14, No. 7, pp. 761-768, 1991.

12.   "Prediction of Fatigue Crack Growth Under Single Overload Application in Ti-6Al-4V", H. Ghonem and M. Zeng, Fatigue and Fracture of Engrg Materials & Structures, Vol. 4, No. 8, pp. 805-814, 1991.

13.   "Environmental Effects on Elevated Temperature Fatigue Crack Growth in a Near-α Ti-1100 Alloy", H. Ghonem and R. Foerch, Material Science and Engineering, A138, pp. 69-81, 1991.

14.   "Depth of intergranular oxygen diffusion during environment-dependent fatigue crack growth in Alloy 718", H. Ghonem and D. Zheng, Materials Science and Engineering, A150, pp. 151-160, 1992.

15.   "Intergranular Crack Tip Oxidation Mechanisms in A Nickel-Based Superalloy",  E. Andrieu, R. Mollins, H. Ghonem and A. Pineau, Materials Science and Engineering, A154, pp. 21-28, 1992.

16.   "Effect of cycle mean strain on small crack growth in alloy 718 at elevated temperatures", A. H. Rosenberger and H. Ghonem, Fatigue and Fracture of Engrg Materials & Structures, 11(15) 11, pp. 1125-1139, 1992.

17.   "Frequency Interaction on High Temperature Fatigue Crack Growth in Alloy 718", H. Ghonem and D. Zheng,  Metallurgical Transactions, Vol.23A, pp.3067-3072, 1992.

18.   "Influence of Prolonged Thermal Exposure at 650C on Intergranular Fatigue Crack Growth Behavior in Alloy 718", D. Zheng and H.Ghonem, Metallurgical Transactions, Vol. 23A, pp. 3169-3171, 1992.

19.   "Effects of Temperature and Frequency on Fatigue Crack Growth in Ti-β21S Monolithic Laminate", H. Ghonem, Y. Wen, M. Thompson and G. Linsey, Materials Science and Engineering, A161, pp. 45-53, 1993.

20.   "Influence of Pre-straining on High Temperature Low Frequency Fatigue Crack Growth in Superalloys", D. Zheng, A. Rosenberger and H. Ghonem, Materials Science and Engineering, A161, pp. 13-21, 1993..

21.   "Elevated temperature fatigue crack growth in Alloy 718 - Part I: Effects of mechanical Variables", H. Ghonem, T. Nicholas and A. Pineau, Fatigue and Fracture of Engrg Materials & Structures, V16(5), pp. 565-576, 1993.

22.   "Elevated temperature fatigue crack growth in Alloy 718 - Part II: Effects of environmental and material variables", H. Ghonem, T. Nicholas and A. Pineau, Fatigue and Fracture of Engrg Materials & Structures, V16(6), pp. 577-591, 1993.

23.   "Environmental interactions in high temperature fatigue crack growth of Ti-1100", R. Foerch, A. Madsen and H. Ghonem, Metallurgical Transaction, V24A, pp. 1321-1332, 1993.

24.   "Microstructural Changes During Aging of a Silicon Containing Near-α Titanium Alloy", A. Madsen, E. Andrieu and H. Ghonem, Materials Science and Engineering, A171, pp. 191-197, 1993.

25.   "Fatigue Crack Growth Characteristics of Ti-β21S Neat Laminate", H. Ghonem, Y. Wen and D. Zheng, in "Damage in Composite Materials", ed. G. Z. Voyiadjis, Studies in Applied Mechanics 34, Elsevier Science Publishers Ltd., New York, pp.161-180, 1993.

26.   "An Interactive Simulation Technique to Determine the Internal Stress States in Fiber Reinforced Titanium Metal Matrix Composites", H. Ghonem, Y. Wen and D. Zheng, Materials Science and Engineering,  A177, pp. 125-134,  1994.

27.   "Effects of Aging on the Tensile and Fatigue Behavior of the Near-α Ti-1100 at both Room Temperature and 593oC", A. Madsen and H. Ghonem, Material Science and Engineering, A177, pp. 63-77,1994.

28.   "Influence of creep-fatigue interaction on high temperature fatigue crack growth of Ti-1100", A. H. Rosenberger and H. Ghonem, Fatigue and Fracture of Engrg Materials & Structures, V. 17, No. 4, pp. 397-410, 1994.

29.   "High temperature elastic-plastic small crack growth behavior in a nickel-base superalloy", A. H. Rosenberger and H. Ghonem, Fatigue and Fracture of Engrg Materials & Structures. 17, No. 5, pp. 509-522, 1994.

30.   "Time-Dependent Stress Analysis in Fiber-Reinforced Metal Matrix Composites -Modelling and Applications", M. Tamin, D., Zheng and H. Ghonem, J. Comp. Technology and Research, V. 16, No. 4, pp. 314-322, 1994.

31.   "High Temperature/High Frequency Bridging Fatigue Crack Growth in Titanium Metal Matrix Composites" D. Zheng and H. Ghonem, ASTM STP life prediction methodologies for Titanium Matrix Composites, March 22-24, 1994.

32.   "Evolution of Internal States in Titanium Metal Matrix Composites Subjected to Cyclic and Creep loading Conditions", M. Tamin, D. Zheng and H. Ghonem,  ASTM  STP Symp on Advances in Fatigue Lifetime Predictive Techniques, Montreal, Quebec, May16, 1994.

33.   "High Temperature Fatigue Crack Growth in σ1240/Timetal-21S Composite", D. Zheng and H. Ghonem, Metallurgical Transactions, V. 26A, No. 9, pp.  2193 - 2488, 1995.

34    “Aging Effects on the Creep Behavior of the Near-Alpha Titanium Alloy Ti-1100", A. Rosenberger, A. Madsen and H. Ghonem, Journal of Materials Performance and Technology, V. 4, No. 2, pp. 182 - 188, 1995

35   Influence of creep-fatigue interaction on high temperature fatigue crack growth behavior of Ti-1100, A. H. Rosenberger and H. Ghonem, International Journal of Fatigue, Volume 17, N. 6, Page 449, 1995.

36   "Separating the Effects of Aluminide and Silicide Precipitation on the Tensile and   Crack Growth Behavior at Room Temperature and 593oC in a Near -α Titanium Alloy", A. Madsen, and H. Ghonem, J of Materials Performance and Technology, V. 4, No. 3, pp. 301- 308, 1995

37   "Time-Dependent Fatigue Crack Growth of Titanium Metal Matrix composites", T. Zhang and H. Ghonem, Fatigue and Fracture of Engineering Materials, V. 18, No. 11, pp.1231-1366, 1995.

 

1996-2000

 

38. "High Temperature/High Frequency Fatigue Crack Growth Damage Mechanisms in Titanium Metal Matrix Composites", D. Zheng and H. Ghonem, ASTM STP 1253, pp137-163, 1996

39 Evolution of Bridging Fiber Stress in Titanium Metal Matrix Composites at Elevated Temperature", M. N. Tamin  and H. Ghonem,  Advances in Fatigue Lifetime Predictive Techniques, ASTM STP 1292, pp. 24-38, 1996.

40   “Influence of Interfacial Properties on Fiber Debonding in Titanium Metal Matrix Composites, M. N. Tamin, D. J. Osborne and H. Ghonem, Fatigue and Fracture at Elevated Temperature, ASME-AD, Vol. 50, pp. 121-134, 1996

41.  A Processing Related Interface Properties in Titanium Metal Matrix Composites, M. N. Tamin, D. J. Osborne and H. Ghonem, Ceramic and Metal Matrix Composites, Part 1, pp. 639-650, 1997.

42. Model for fracture of bridging fibers in titanium metal matrix composites, H. Ghonem,
ASME- MD, v86, p 87-93, 1999.

43.  Fiber Fracture Criterion in Titanium Metal Matrix Composites at Elevated Temperature, H. Ghonem, Advancing with Composites, AMME-CANICA, pp. 37, 2000.

44.  Fatigue Damage Mechanisms of Bridging Fibers in Titanium Metal Matrix Composites, M. N. Tamin and H. Ghonem, J. Engineering Materials and Technology, V122, N4, pp. 370, 2000.

 

2001-2005

 

45.  Elevated Temperature Interphase Properties of Titanium Matrix Composites, D. Osborne, N. Chandra and H. Ghonem, J. of Composites Part A: Applied Science and Manufacturing, V 32, No 3-4, pp 545-553, 2001

46.  Interfacial Mechanics of Push-out Tests: Theory and Experiments, N. Chandra and H. Ghonem, Interfacial Phenomena in Composite Materials, J. of Composites Part A: Applied Science and Manufacturing, V 32, No 3-4, pp 575-584, 2001

47.  Interfacial mechanics of push-out tests: theory and experiments, N. Chandra and H. Ghonem, Composites Part A: Applied Science and Manufacturing, V 32, Issues 3-4, pp 575-584, 2001.

48.  Some issues in the application of cohesive zone models for metal–ceramic interfaces, N. Chandra, H. Li, C. Shet and H. Ghonem, International Journal of Solids and Structures, V 39, Issue 10, pp. 2827-2855, 2002

49  Effects of loading frequency on fatigue crack growth mechanisms in  Ti microstructure with large colony size, F. Sansoz and H. Ghonem, Materials Science and Engineering A, V 356, Issues1-2, pp.81-92, 2003.

50.  Fatigue Crack Growth Mechanisms in Ti6242 Lamellar Microstructures: Influence of Loading Frequency and Temperature, F. Sansoz and H. Ghonem, J. of Metallurgical Transactions and Materials A, V 34, pp. 2565-2577, 2003.

51. Effects of High Temperature Exposure on the Tensile Ductility of an Aged Beta Titanium, F. Sansoz, M. Almesalamy and H. Ghonem, J. of Metallurgical Transactions and Materials A V35, pp 3113-3129, 2004.

52.  Influence of thermal aging on duplex Titanium IMI834, F. Sansoz and H. Ghonem, J. of Metallurgical Transactions and Materials A, submitted 2004

53.  High Temperature Fatigue Crack Growth Mechanisms in Coarse and Fine Lamellar Ti6242 in Air and Vacuum Environment, C. Sarrazin-Baudoux, F. Sansoz and H. Ghonem, Materials Science and Engineering A, submitted 2004

 

 

       

PROCEEDING AND CONFERENCE PUBLICATIONS:

 

1976-1980

 

1.     "Stochastic Fatigue Crack Propagation in Polycrystalline Solids", H. Ghonem and J. W. Provan. Proceedings of Sixth Canadian Congress of Applied Mechanics, University of British Columbia, Vol. 1, May 1977.

2.     "Stochastic Fatigue Crack Initiation and Propagation in Polycrystalline Solids", H. Ghonem, J. W. Provan and J. Kalousek.  Proceedings of Seventh Canadian Congress of Applied Mechanics, University of Sherbrooke, Vol. 1, May 1979.

3.     "Effects of Bainitic Streaks on the Fracture Toughness of the Rail Steel", J. Kalousek, D. E. Parsons and H. Ghonem.  Proceedings of the 19th Conference on Metallurgy, Halifax, Nova Scotia, Canada, August 1980.

 

1981-1985

 

4.     "Longitudinal and Transverse Cracks in Rolling Contract Problems", H. Ghonem and J. Kalousek.  Proceedings of the Eighth Canadian Congress of Applied Mechanics, University of Alberta, Vol. 1, May 1981.

5.     "The Use of Angle-of-Attack Measurements to Estimate Rail Wear", H. Ghonem and J. Kalousek, in Wheel/Rail Load and Displacement Measurement Techniques, eds. Pin Tong and R. Grief, US Transportation Development Center, Boston, MA., pp. 1310-1334, January 1982.

6.     "Aspects of Plastic Deformation and Fatigue Damage in Pearlitic Steel", H. Ghonem, J. Kalousek, D. Stone and E. E. Laufer.  ASME Proceedings of the Second International Heavy Haul Conference, Colorado Spring, CO, pp. 25-50, September 1982. 

7.     "Observations on Pearlitic Steel Characteristics Associated with Rolling-Sliding Problems", H. Ghonem and J. Kalousek, Contact Mechanics, ed. J. Kalousek, et al, University of Waterloo Press, pp. 249-269, July 1983.

8.     "Lateral Creepage and Its Effect on Wear", J. Kalousek, G. Roseval, and H. Ghonem, Contact Mechanics, eds. J. Kalousek, et al, University of Waterloo Press, pp. 373-394, July 1983.

9.     "On the Characteristics of the Chromium-Molybdenium Bainitic Steel", H. Ghonem, J. Kalousek, and D. H. Stone.  Proceedings of International Conference on Recent Developments in Specialty Steels and Hard Materials, Pretoria, South Africa, November 1982.  Also in Specialty Steels and Hard Materials, ed., J. B. Clark and N. R. Comins, Pergamon Press, Oxford, pp. 259-265, 1983.

10.   "Deformation Characteristics of Pearlitic Rail Steel", H. Ghonem and J. Kalousek, Proceedings of the Ninth Canadian Congress of Applied Mechanics, University of Saskatchewan, May 1983.

11.   "The Effect of Lubrication and Steering on Rail/Wheel Wear and Contact Fatigue", H. Ghonem, and J. Kalousek.  ASME International Conference on the Economics and Performance of Freight Car Trucks, Montreal, October 1983.

12.   "Effect of Mean Stress on Fatigue Crack Initiation Life of 0.8% Carbon Steel", H. Ghonem and S. Kamath.  ASME - PVP Conference, San Antonio, TX , June 1983.

13.   "Wear and Lubrication Effect on Subsurface Failure of Several Steels", J. Kalousek, H. Ghonem, and R. Steele.  Proceedings of the 11th Leeds-Lyon Symposium on Tribology, University of Leeds, Leeds, England, September 1984.

14.   "Crack Evaluation and Scatter During Crack Propagation Stage in Polycrystalline Solids", H. Ghonem and S. Dore.  Proceedings of the 26th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Material Conference, Orlando, FL, Vol. II, pp. 901-918, April 1985.

15.   "Ratchetting - Low Cycle Fatigue Interaction in AISI 1080 Steel", H. Ghonem.  ASTM Symposium on Low Cycle Fatigue, Lake George, NY, Oct. 1985.

 

1986-1990

 

16.   "Biaxial (Compression/Shear) Fatigue Crack Initiation", H. Ghonem and J. Kalousek.  Contact Mechanics and Wear of Rail/Wheel Systems, eds. G. Gladwell, H. Ghonem, and J. Kalousek, Waterloo Press, pp. 329-360, 1987.

17.   "Constant-Probability Crack Growth Curves in Al7075-T6", H. Ghonem.  20th National Fracture Mechanics: Perspectives and Directions, Lehigh University, June 1987.

18.   "Two Stage Crack Tip Oxidation Mechanism in Alloy 718", E. Andrieu, H. Ghonem and A. Pineau, Elevated Temperature Crack Growth, eds. S. Mall and T. Nicholas, ASME Publication, N.Y., ASME-MD, Vol. 18, pp. 25-30, 1990.

19.   "Frequency Effects on Fatigue Crack Growth Behavior in a Near-α Titanium Alloy", H. Ghonem and R. Foerch, Elevated Temperature Crack Growth, eds. S. Mall and T. Nicholas, ASME Publications, N.Y., ASME-MD, vol. 18, pp. 93-106, 1990.

 

1991-1995

 

20.   "Environmentally-dominated Fatigue Crack Growth Model for Alloy 718", H. Ghonem and D. Zheng.  Proceedings of Sixth International Conference on Mechanical Behavior of Materials, eds. M. Jono and T. Inoue, Pergamon Press, Kyoto, Japan, pp.373-378, 1991.

21.   "Characterization of Environmentally-Dominated Fatigue Crack Growth in Alloy 718 at 650oC", H. Ghonem and D. Zheng, Proceedings of Int. Symposium on Superalloy 718, 625 and Various Derivatives, Pittsburgh, PA, ed. E. Loria, AIME Publications, pp. 477-490, 1991.

22.   "Analysis of elevated temperature crack growth mechanisms in Alloy 718", H. Ghonem, T. Nicholas and A. Pineau, Proceedings of Symposium on High Temperature Effects, ASME Winter Annual Meeting, Atlanta, Ga, November, 1991

23.   "Mechanisms and modelling of environment-dependent fatigue crack growth in superalloys", H. Ghonem, USAFOSR Contractor Meeting, Dayton, Ohio, Oct., 1991 

24.   "Influence of environment on the fatigue crack growth performance in β21S laminates", H. Ghonem, Y. Wen and A. Rosenberger, 2nd Ti Composite Workshop, Orlando, November 6, 1991.

25.   "Influence of predeformation on crack tip oxidation shielding in nickel based superalloys", A. Rosenberger, D. Zheng and H. Ghonem, 2nd International Conference on Computer Aided Assessment and Control Localized Damage, Southampton UK, July 1, 1992.

26.   "Deformation and fatigue behavior of a new high temperature titanium alloy", A. Madesn, R. Foerch and H. Ghonem, Aeromat, Long Beach, CA, May 18, 1992.

27.   "Investigation of environment-dependent fatigue crack growth stage in a Ni-based superalloy", D. Zheng and H. Ghonem, ASME Summer Mechanics and Materials Conference, Tempe, Arizona, May 20, 1992.

28.   "Influence of high temperature elastic-plastic small crack growth in a nickel-base superalloy on the life prediction of structural components", A. Rosenberger, E. Andrieu and H. Ghonem, Proceedings of 7th National Symposium on Superalloys, eds., S. Antolovich,et al., TMS, Warrendale, PA, 1992, pp.737-746.

29.   "Effect of compression excursion on elastic-plastic small crack growth in nickel based superalloys", A. Rosenberger and H. Ghonem, Proceedings of 3rd International Conference on Low Cycle Fatigue and Elastic Plastic Behavior of Materials, Berlin, Germany, Sept. 1992 ed. K. -T. Rie, Elsevier Applied Science, Elsevier Science Publishers Ltd. Essex, England, 1992, pp. 545-551.

30.   Time Dependent Stress Analysis of Thermal Cyclic Loading in Titanium Metal Matrix Composites", M. Tamin , D. Zheng and H. Ghonem, Seventh NASA Thermomechanical Fatigue Workshop, NASA Lewis Research Center, December 3-4, 1992. 

31.   "Axial Residual stresses in Continuous Fiber Reinforced Metal Matrix Composite under the Thermal Cyclic Loadings", M. Tamin, D. Zheng and H. Ghonem, Proceedings of Seventh Thermomechanical Fatigue Workshop, NASA Lewis, Cleveland, Ohio, Dec. 1992.

32.   "Thermal Residual Stresses in Titanium Metal Matrix Continuous Fiber-Reinforced Composites". D. Zheng and H. Ghonem, 38th International Gas Turbine and Aeroengine Congress, May 1993.

33.   "Time-Dependent Effects on Crack Tip Driving Force in Fiber Reinforced Titanium Metal Matrix Composites", Materials Week'93,  Pittsburgh, PA. Oct, 1993.

34.   "Micromechanical Modelling of Time Dependent Behavior in Fiber Reinforced Metal Matrix Composites", M. Tamin, D.Zheng and H. Ghonem, Fatigue 93, Montreal, Quebec, Canada, 1993. 

35.   "Experimental Measurements of Thermal Stresses in Fiber reinforced Metal Matrix Composites", H. Ghonem and D. Zheng, Fatigue 93, Montreal, Quebec, Canada, 1993.

36.   "Role of Predeformation in the Modification of Crack Tip Oxidation Resistance", D. Zheng, A. Rosenberger and H. Ghonem, ASME/International Gas Turbine Institute Turbo Expo Congress, Cincinnati, OH,  A1993,  Paper No.  93-GT-365.

37.   "Interfacial Reaction Kinetics in Unidirectional σ1240/Ti-β21S Composite", D. Zheng and H. Ghonem, 2nd Canadian Int Conf on Composite, 27-29 Sept 1993, Ottawa, Canada.

38.   "Influences of Temperature and Frequency on Fatigue Crack Growth in Metal Matrix Composites", D. Zheng, A. Rosenberger and H. Ghonem, 2nd Canadian Int Conf on Composite, 27-29 Sept 1993, Ottawa, Canada

39    "High Temperature Crack Growth in Ti-1100&Ti-Matrix Composites",, A. Rosenberger, D. Zheng and H. Ghonem,  40th Sagamore Army Materials Research Conference: Metallic Materials for Light Wight Applications,  Plymouth,  MA,  August 1993.

40.   "High Temperature/High Frequency Bridging Fatigue Crack Growth in Titanium Metal Matrix Composites" D. Zheng and H. Ghonem, ASTM Symp on life prediction methodologies for Titanium Matrix Composites, March 22-24, 1994.

41.   "Evolution of Internal States in Titanium Metal Matrix Composites Subjected to Cyclic and Creep loading Conditions", M. Tamin, D. Zheng and H. Ghonem,  ASTM Symp on Advances in Fatigue Lifetime Predictive Techniques, Montreal, Quebec, May16, 1994.

42.   "Bridged Fatigue Crack Growth in Titanium Metal Matrix Composites", H. Ghonem and D. Zheng, 2nd Applied Mechanics Conference, University of Arizona, June 1994.

43.   "Crack Opening Displacement of Bridging Cracks at elevated Temperature", 1st CCEM, T. Zhang and H. Ghonem, University of New Orleans, August 1994.

45.   "Fatigue-Creep Interaction in Titanium Ti-1100 at 593oC", A. Rosenberger and H. Ghonem, Tenth European Conference on Fracture, Berlin, Germany, Sept. 1994.

46.   "Inelastic Deformation of Continuous Fiber Reinforced Metal Matrix Composites Under Cyclic Thermal and Creep Loading", M.N. Tamin and H. Ghonem, Symposium on Damage Mechanics in Composites, Winter Annual Meeting, Chicago, Ill., November 13-18, 1994.

47.   "High Temperature Fatigue Crack Growth mechanisms In Titanium Metal Matrix Composites", H. Ghonem, National Institute of Composites meeting, Materials Laboratory, WPAFB, Dayton, Sept. 16-18, 1994.

48.   "Interphase Characteristics of SM124/Timeta-l21S ", D. J. Osborne and H. Ghonem,  ASME Summer Meeting, University of California, Los Angeles, CA, June 1995.

49.   "Bridging Fatigue Crack Tip Shielding Mechanisms in Ti-MMC at Elevated Temperatures" ASME WAM 95, San Francisco, Nov 12-17, 1995.

50.   "Interphase Growth Characteristics and their Significance in High Temperature Crack Tip Shielding in Ti- MMC", D. J. Osborne and H. Ghonem, Interfacial Phenomena in Composite Materials 95,  11-13 September 1995,  Eindhoven, The Netherlands.

51.   "Analysis of Time‑Dependent Fatigue Crack Tip in Titanium Metal Matrix Composites". T. Zhang, M. N. Tamin and H. Ghonem,  ASME WAM95, San Francisco, Nov 12-17, 1995.

52.   "Bridging Fatigue Crack Tip Shielding Mechanisms in Ti-MMC at Elevated Temperatures" ASME WAM95, San Francisco, Nov 12-17, 1995.

 

1996-2000

 

53.   A Fatigue-Creep Interaction in Titanium Metal Matrix Composites, M. N. Tamin and H. Ghonem,  19th Intl. Congress og Theoretical and Applied Mechanics ICTAM 96, Kyoto, Japan, 25 - 31 August, 1996.

54.   A Criterion for the Fracture of Bridging Fibers in metal Matrix Composites, M. N. Tamin and H. Ghonem, Intl. Conf. on Ceramic and Metal Matrix Composites CMMC 96, San Sebastian, Spain, 9 - 12 September, 96.

55.   A Fiber/Matrix Interface Cracking in Metal Matrix Composites at Elevated Temperature, M. N. Tamin, D. J. Osborne and H. Ghonem, 5th Intl. Symp. on Processing and Fabrication of Advanced Materials, 1996 TMS/ASM Fall Meeting, Cincinnati, OH, 6 - 10 October, 96.

56.   A Link Between Processing and Damage Response in Metal Matrix Composites, D. J. Osborne, M. N. Tamin and H. Ghonem, Intl. Mechanical Engineering Congress and Exposition: ASME Winter Annual Meeting, Symp. on Application of Metallic Materials in Advanced Engineering Systems and Emerging Technologies, Atlanta, GA, 17 - 22 November, 96

57.   A High Temperature Fatigue Crack Growth of Inertia Weld of N16 Superalloy, T. Clad, H. Ghonem and A, Pineau, La Revue de Metallurgy - SF2M - JA96, pp. 113, 1996.

58.   A Criterion for the Fracture of Bridging Fibers in metal Matrix Composites@, M.N. Tamin and H. Ghonem, 19th Intl. Congress of Theoretical and Applied Mechanics ICTAM 96, Kyoto, Japan, August 25 - 31, 1996.

59.   Influence of Processing-Induced properties on Damage in Metal Matrix Composites@, M.N. Tamin, D. Osborne and H. Ghonem, 5th Intl. Symp. on Processing and Fabrication of Advanced Materials, 1996 T.S./ASM Fall Meeting, Cincinnati, OH, October 6 - 10, 1996.

60.   A Fiber Damage Mechanisms in Titanium Metal Matrix Composites, M. N. Tamin and H. Ghonem, International Conference on Fatigue of Composites, Societe Francaise de Metallurgie et de Materiaux, Paris, France, 3-5 June, 1997.

61.   “Processing Related Interface Properties in Titanium Metal Matrix Composites”, M. N. Tamin, D. J. Osborne and H. Ghonem, Ceramic and Metal Matrix Composites, CMMC 96, Part 1, ed., M. Fuentes, J. M. Martinez-Esnaole and A. M. Daniel, Trans Tech Publications, Switzerland, pp. 639-650, 1997.

62.   A High Temperature Shear Decohesion Strength of Ti-MMC Interface, D. Osborne and H. Ghonem, Synthesis, Processing and Modeling of Advanced Materials, American Society of Metals and Societe Francaise de Metallurgie et de Materiaux, Paris, France, 25-27 June 1997.

63.   Interphase debonding strength of Ti-MMC using a localized damage Approach, M., T. Tamin and H. Ghonem, Fifth Int Conf Localized Damage, Bologna, Italy, June 8-10, 1998

64.   Fatigue Damage Mechanisms of Bridging Fibers in Titanium Metal Matrix Composites M. N. Tamin and H. Ghonem, Durability of Damage Tolerance of Composite Materials and Structures, ASME, 1999

65.   A Model for Bridging Crack Growth in Titanium Metal Matrix Composites, H. Ghonem, and J-L. Chaboche, 12 Int Conf on Composite Materials, Paris, France, July 5-9, 1999.

66.   A Real-time Mechanical Simulation of Residual Stresses in Metal Matrix Composites Hamouda Ghonem, proceeding Conf on Theoretical , Experimental and Computational mechanics, Cincinnati, Ohio, June 7-9, 1999.

67.   Elevated Temperature Interphase Properties of Titanium Matrix Composites, D. Osborne, H. Ghonem and N. Chandra, Interfacial Phenomena in Composite Materials, Berlin, Germany, September 8-10, 1999.

68.   Interfacial Mechanics of Push-out Tests: Theory and Experiments, N. Chandra and H. Ghonem, Interfacial Phenomena in Composite Materials, Berlin, Germany, September 8-10, 1999.

69.   Model for fracture of bridging fibers in titanium metal matrix composites
H. Ghonem,  Symposium on Durability and Damage Tolerance of Composite Materials and Structures International Mechanical Engineering Congress and Exposition ASME, Materials Division, Nashville, TN, November14-19, 1999

70.   Fiber Fracture Criterion in Titanium Metal Matrix Composites at Elevated Temperature, H. Ghonem, Int Conf on Advancing with Composites, Milan, Italy, May 9-11, 2000.

71.   A Model for Fatigue Crack Initiation fro Notches, A. Zaki and H. Ghonem, ASME- PVP2000- Seattle, Washington, July 23-27, 2000. 

72.   Modeling the Ratchetting Phenomenon in Austenitic Steel at Room Temperature, A. Zaki and H. Ghonem, ASME 2000. Reliability, Stress Analysis and Failure Prevention Conference, Baltimore, Maryland, September 10-13, 2000.

 

2001-2005

 

73.   Time-Dependent Fracture Mechanisms in Fully Lamellar Ti6242 Alloy, F. Sansoz, M. Shazly and H. Ghonem, La Revue de Metallurgy - SF2M, Paris, France, May 27-30, 2001.

74.   Bridging Fatigue Crack Growth in Ti Composite: Interface Decohesion and Fiber Fracture Interaction D. Osborne, H. Ghonem, 7th Int Conf. on Interfacial Phenomena in Composite Materials, Arcachon, France, Sept 11-14, 2001.

75.  Decohsion Zone Model, Li, N. Chandra and H. Ghonem, 7th Int Conf. on Interfacial Phenomena in Composite Materials, Arcachon, France, Sept 11-14, 2001

76.   A Model for Fatigue Crack Initiation from Notches, A. Zaki and H. Ghonem, Symposium on Failure Analysis and Prevention, ASME WAM, New York, Nov.  11-16, 2001

77.   Modeling of Interfacial Debonding in SiC-Titanium Composites at Elevated Temperature, D. Osborne and H. Ghonem, Symposium on Durability and Damage of Heterogeneous Materials and Structures, ASME WAM, New York, Nov.  11-16, 2001   

78   Fiber Fracture in Titanium Metal Matrix Composites, H. Ghonem, Int Conference on Composites, Montreal, 2002.

79. Embrittlement in Thin Sheets of a Near Beta Titanium Alloy Subjected to Thermal Exposure from 482 °C to 693 °C in Air Environment, 10th World Conference on Titanium, Hamburg, Germany, 2003. 

80. Embrittlement Mechanisms of Thin Sheets Timetal21S Alloy Subjected to Thermal Exposure in Air Environment, M. Almesallmy, F. Sansoz, M. Jouiad and H. Ghonem, THERMEC2003 Spain, 2003.

 

 

TECHNICAL REPORTS

 

1.     "Crack Initiation Study on Bolster of 100-Ton Coal Car", H. Ghonem.  CP- Technical Report  CP-TR-S561-78, March 1978.

2.     "Design of Lockable Draw Gear", H. Ghonem and  W. Pack.  CP Technical Report TR65-78, July 1978.

3.     "Development of High Strength Weldable Chromium-Molybdenum Steel", H. Ghonem and J. Kalousek.  CP Technical Report S571-78, July 1978.

4.     "Comparative Performance of Type II Trucks", H. Ghonem and R. Gonsalves.  CP Technical Report S576-78, November 1978.

5.     "Evaluation of Recommended Procedure for Welding 1% British Cr Steel", H. Ghonem.  CP Technical Reports S594-79, August 1979.

6.     "Analysis of the Russian P-65 Steel", H.Ghonem. CP Technical Report S606-79, October 1979.

7.     "Auto Bumper Damage Test", H. Ghonem and L. Yee.  CP Technical Report S602-79, October 1979.

8.     "Analysis of Welded Carbon Steel", H. Ghonem. CP Technical Report S639-80, May 1980.

9.     "On the Performance of the Experimental Baintic Chromium-Molybdenum Steel", H. Ghonem.  Research Department, Canadian Pacific Limited, Montreal, Canada, April 1982.

10.   "Establishment of Quantitative Wear and Fatigue Model for Railway Rail Subjected to Heavy Traffic Conditions and Different Lubrication Regimes", H. Ghonem. Association of American Railroads, Chicago, IL, October 1982.

11.   "Critical Topics for Fatigue and Fracture Research", H. Ghonem.  Industrial Materials Research Institute, National Research Council, Montreal, Canada, August 1983.

12.   "Experimental Study of Cyclic-Ratchetting Damage in Pearlitic Rail Steel", H. Ghonem and S. Kamath.  Association of American Railroads, Chicago, IL, August 1985.

13.   "Experimental Study of Biaxial Fatigue under Rolling Contact Loading Conditions", H. Ghonem and S. Kumar.  Association of American Railroads, Chicago, IL, August 1985.

14.   "Probabilistic Description of Fatigue Crack growth During Crack Propagation Stage in Polycrystalline Solids", H. Ghonem and S. Dore.  Final Report submitted to USAF Office of Scientific Research, Bolling Air Force Base, Washington, DC, December 1985.

15.   "Probabilistic Description of Fatigue Crack Growth Under Constant- and Variable-Amplitude Loading",  H. Ghonem and M. Zeng, Final Report submitted to USAF Office of Scientific Research, Bolling Air Force Base, Washington, DC, March 1990.

16.   "Experimental Observations of Oxidation-Assisted Crack Growth Behavior in Alloy 718", H. Ghonem, E. Andrieu and A. Pineau.  Report prepared for United Technologies Corporation, Pratt & Whitney Group and Department of Air Force, Air Force Office of Scientific Research, January 1990.

17.   "Quantitative Modeling of Oxidation-Assisted Crack Growth Behavior in Alloy 718", H. Ghonem and D. Zheng.  Report prepared for United Technologies Corporation, Pratt & Whitney Group and Department of Air Force, Air Force Office of Scientific Research, January 1990.

18.   "Mechanisms and Modelling of Environment-Dependent Fatigue Crack Growth in a Nickel-Based Superalloy", H. Ghonem and D. Zheng, Final Report submitted to USAF Office of Scientific.  Research, Bolling Air Force Base, Washington, DC, October 1991.

19.   "Environmental Interactions in High Temperature Fatigue Crack Growth of Ti-1100 Part I: Quantitative Analysis", R. Foerch, A. Madsen and H. Ghonem, Titanium Metals Corporation of America, Henderson , Nevada, May 1992.

20.   "Aspects of High Temperature Damage in Fiber Reinforced Titanium Metal Matrix Composites"  H. Ghonem and D. Zheng, Annual Report submitted to USAF Office of Scientific.  Research, Bolling Air Force Base, Washington, DC, July 1993.

21.   "High - temperature Interphase Behavior of SiC Fiber Reinforced Titanium Matrix Composites", D. Osborne and H. Ghonem, Annual Report, submitted to USAF Office of Scientific.  Research, Bolling Air Force Base, Washington, DC,  March 1995.

22.   A Fatigue Crack Growth Mechanisms in Titanium Metal Matrix Composites, H. Ghonem, Final Report, submitted to USAF Office of Scientific.  Research, Bolling Air Force Base, Washington, DC,  March 1996.

23.  Experimental/Numerical study of Deformation and Damage Behavior of Metals Used in Thin Shell Edge Welded Metal Bellows for Room and Elevated Temperature Applications, H. Ghonem, Research and Development, EG&G Mechanical Component Group, June 1996

24.  Experimental Study of Localized Damage in β21S Titanium Metal Matrix Composites at Elevated Temperature Conditions, D. Osborne and H. Ghonem, Annual Report, submitted to USAF Office of Scientific Research, Bolling Air Force Base, Washington, DC, June 1996

25.  Experimental Study of Localized Damage in β21S Titanium Metal Matrix Composites at Elevated Temperature Conditions, D.  Osborne and H. Ghonem, Final Report, submitted to USAF Office of Scientific Research, Bolling Air Force Base, Washington, DC, Sept 1997

26.  Durability and Damage Tolerance of High Temperature Advanced Titanium Metal Matrix Composites- Part I, H. Ghonem, USAF Office of Scientific Research,  September 1998.

27.  Durability and Damage Tolerance of High Temperature Advanced Titanium Metal Matrix Composites- Part II, H. Ghonem, USAF Office of Scientific Research, August 1999.

28. Modeling of Interfacial Fracture Mechanisms in Bimaterial Systems at Elevated Temperatures Using Experimental and Computational Methods, H. Ghonem and N. Chandra, USAF Office of Scientific Research, September 2000.

29.  Influence of heat treatment on the mechanical properties of Ti6242 alloy, F. Sansoz and H. Ghonem, SNECMA, August 2000.

30.  High-Temperature Fatigue Crack Growth Damage Mechanisms of Fully Lamellar Ti6242, F. Sansoz and H. Ghonem, SNECMA, November 2001.