Sample of  Publications and Patents

Dr. Philip Datseris

Mankame, A., Jouaneh, M., and Datseris, P., "Orientation and Stacking of Parts Based on Internal Features," Proc. of the  SPIE's International Symposium on Intelligent Systems and Advanced Manufacturing,Vol. 2595, pp. 178-190, October 23-26, 1995, Philadelphia, PA.

"A Manufacturing System for Automated Production of Polystyrene Molds", IEEE Robotics and Automation Magazine., Vol.3, no. 3, pp. 39-43, Sept. 1996 with A. Viswanathan, M. Jouaneh, and W. Palm .

M. Jouaneh, A. Hammad, and P. Datseris, "A Flexible Automated Foam Cutting System", Int. J. of Machine Tools and Manufacture, vol. 37, No. 4, pp. 437-449, 1997

"Orientation and Stacking of Parts Based on Internal Features", in Proceedings of PIE's International Symposium on Intelligent Systems and Advanced Manufacturing, 23-26 October 1995, Philadelphia, PA, Vol. 2595, pp. 178-190 with A. Mankame and M. Jouaneh.

A. Mankame, M. Jouaneh, and P. Datseris, "Stack Stability Associated with High-Speed Orientation and Stacking of Parts Based on Internal Features," In Proceedings of the International Manufacturing Engineering Conference, Aug. 7-9, 1996, Storrs, CT.

A. Mankame, M. Jouaneh, and P. Datseris, "Effect of Stack Height on High- Speed Orientation and Stacking of Parts Based on Internal Features," submitted to the International Journal of Robotics and Automation, October 1996

"High-Speed Orientation and Stacking of Parts Based on Internal Features", presented and published in the Proceedings of the Japan-USA Symposium on Flexible Automation,  July 7-10,   1996,  Boston, MA,  with A. Mankame and M. Jouaneh .

Dr. Musa Jouaneh

M. Jouaneh, A. Hammad, and P. Datseris, "A Flexible Automated Foam Cutting System", Int. J. of Machine Tools and Manufacture, vol. 37, No. 4, pp. 437-449, 1997.

M. Jouaneh and P. Ge, " Modeling and Control of a Micropositioning Tower", Mechatronics, Vol. 7, No. 5, pp. 465-478, 1997.

A. Viswanathan, M. Jouaneh, P. Datseris, and W. Palm, "A Manufacturing System for Automated Production of Polystyrene Molds", IEEE Robotics and Automation Magazine. vol. 3, no. 3, pp. 39-43, Sept. 1996.

M. Jouaneh, and S. Rangwala, "Real-Time Control of Thermal Distortion During Pulsed Laser Welding of Optical Packages", Trans. of the ASME, Journal of Manufacturing Science and Engineering, vol. 118, May 1996.

P. Ge, and M. Jouaneh, "Tracking Control of a Piezoceramic Actuator", IEEE Trans. on Control Systems Technology, vol. 4, no. 3, May 1996.

R. Yang, M. Jouaneh, and R. Schweiser, "Design and Characterization of a Low-Profile Micropositioning Stage", Precision Engineering, Journal of the American Society for Precision Engineering, vol. 18, no. 1, 1996.

P. Ge, and M. Jouaneh, "Modeling Hysteresis in Piezoceramic Actuators", Precision Engineering, Journal of the American Society for Precision Engineering, vol. 17, no. 4, 1995.

N. Srinivasa and M. Jouaneh, "An Invariant Pattern Recognition Machine Using an Enhanced ART Architecture", IEEE Trans. on Systems, Man, and Cybernetics, vol. 23, no. 5, pp. 335-341, September/October 1993.

 

Dr. David Taggart

      Taggart, D. G., Pipes, R. B., and Mosko, J. C., "Test Method Evaluation for Fiber Reinforced Molding Materials," Polymer Composites, pp. 56-61, September, 1980.

      Pipes, R. B., McCullough, R. L. and Taggart, D. G., "Behavior of Discontinuous Fiber Composites: Fiber Orientation," Polymer Composites, pp. 34-39, January, 1982.

      McMahon, P. E. and Taggart, D. G., "Effects of Carbon Fiber Strain and Resin Characteristics on Optimum Composite Performance," Progress in Science and Eng. of Composites, ICCM-IV, pp. 529-536, 1982.

      Taggart, D. G., and Schwan, F. J., "Evaluation of Woven Fabric Composites for Automotive Applications," Journal of Materials Shaping Technology, Vol. 5, No. 1, pp. 41-51, 1987.

      Taggart, D. G. and Bassani, J. L., "Elastic-Plastic Behavior of Particle Reinforced Composites - Influence of Residual Stress," Mechanics of Materials, Vol. 12, pp. 63-80, 1991.

      Taggart, D. G., "Free Edge Effects in Microbuckling Failure of Unidirectional Composites," Composites - Design, Manufacture and Application, ICCM/VIII, Section 35, pp. D-1 - D-10, 1991.

      Taggart, D. G., Qin, J. and Adley, M. D. "Evaluation of Analytical and Numerical Models for the Elastic-Plastic Response of Particulate Composites," Processing, Fab. & Manuf. of Comp. Matls., MD-V. 35, ASME 1992.

      Taggart, D. G. and Wen, Y. "Thermal Deformation and Residual Stresses in Particulate Metal Matrix Composites," Developments in Theor. and Appl. Mechanics, Vol. XVII, SECTAM XVII, pp. 511-520, 1994.

      Sheridan, M. D., Taggart, D. G. and Kim, T. J., "Screw Thread Machining of Composite Materials using Abrasive Waterjet Cutting," Proceedings of ASME Annual Meeting, November, 1994.

      Adley, M. D. and Taggart, D. G., "Dilute Estimates of Inelastic Deformation in Metal-Matrix Composites," Computers & Structures, Vol. 57, No. 5, pp. 773-781, 1995.

      Taggart, D. G., Kahn, J. A., Kim, T. J. and Nanduri, M., "Exploration of Innovative Composite Joining Methods Using Abrasive Waterjet Machining," Proceedings of the International Composites Expo, January, 1997.


PATENTS

M. Jouaneh, and S. Rangwala, "Method for Laser Welding of Optical Packages", U.S. Patent # 5,367,140, Issued November 22, 1994.

N. Hana, and M. Jouaneh, "A Device for Remotely Changing the Set Temperature of a Thermostat", U.S. Patent # 5,644,302, Issued July 1, 1997.